3oz Sublimation Shot Glass (BLANK)

• Clear shot glass with gold trim and printable white area for sublimation printing. 
• Hand wash only

 Instructions:

****These times and temps are based on what works for Flossie Blanks and no other person.****

1. Clean Glass with alcohol first to remove any prints or oils.
2. Print and Cut out the pattern and use heat tape to adhere it to the glass.
3. (OPTIONAL) Cover the cup with shrink wrap.
4. Place in convection oven for 8 minutes at 400 degrees.
5. Remove the shrink bag and the image from the glass as soon as possible.

Fan for cooling (DO NOT PUT IN WATER THE GLASS WILL CRACK)

• The recommended settings above may need adjustments for best results. Settings will vary depending on the heat press/oven brand and model ink and paper and atmospheric conditions.