KIDS TUMBLER 12oz Sublimation (BLANK)

12oz Sublimation KIDs Water Bottle with attached straw lid.  Four colors available.

Stainless Steel Double Wall vacuum with handgrip.

Suggested Transfer instructions 

Printing area Measurements 8.2"W x 5.2"H

Instructions:

****These times and temps are based on what works for Flossie Blanks and no other person.****

1. Clean Tumbler with alcohol first to remove any prints or oils.
2. Print and Cut out the pattern and use heat tape to adhere it to the tumbler.
3. (OPTIONAL) Cover the cup with shrink wrap.
4. Place in convection oven for 5 minutes at 380 degrees.
5. Remove the shrink bag and the image from the tumbler as soon as possible.

Temp/Time: 380 F/5 minutes Convection Oven

• The recommended settings above may need adjustments for best results. Settings will vary depending on the heat press/oven brand and model ink and paper and atmospheric conditions.